Products > Diamond Profile Wheels > Profile Wheels for Hand Grinders > 3/4" Bevel Diamond Profile Wheel >

3/4" Diamond Profile Wheel for Hand Grinders.

This tool is made with vacuum brazed diamond technology and will give the user multiple hundreds of linear feet of life. Unlike electroplating the vacuum brazed process encases the entire diamond in bonding material. This creates support throughout the diamond and prevents the diamonds from fracturing and prematurely failing. This process will also allow the user to run the tool at a much higher rpm than electroplated tools and can also be used without water. A ¾” bevel is commonly used to make a 45 degree bevel on the edges of tile, granite slabs and on the inside edge of an under mount sink hole as well as concrete countertops. This wheel will thread directly onto a grinder with a 5/8-11 threaded arbor. To use this tool, simply thread it onto the grinder position the top black ring flat on the top surface of the material. With the tool powered on, apply force inward until the bit stops (fool proof bearing stop) and pull the tool along the edge. The top black disc will keep the tool at a constant vertical position while the bottom ride bearing keeps the tool at a constant depth into the material. This system is fool proof and a favorite of many do it yourself individuals. The process is very quick, on a 3/4" bevel it will take less than a minute a piece on a 12" X 12" tile. This tool is a 30 - 40 grit stock removal tool, if you need to Polish the edge to a shine you will need a wet polisher and a set of diamond pads to complete the process